WELCOME TO NH L IND PRD I E CO LTD GD WeChat About Us Contact Us 中文版

GUANGDONG NANHAI LIGHT INDUSTRIAL PRODUCTS

GUANGDONG NANHAI LIGHT INDUSTRIAL PRODUCTS IMP.& EXP. CO. LTD (NH L IND PRD I E CO LTD GD)

32 years focused on the import and export of light industrial products

Free Hotline

0757-82237930

0757-82237930

News 新闻中心

FAQ
Position: Home > News > FAQ

Easily solve nine common questions furniture

Source:NH L IND PRD I E CO LTD GD Release Date:2017-12-12 Reading Volume:

1, Drawer wear

Drawer Road wear relatively large drawer can be pulled out of a body, electric iron in the drawer Road hot layer of candle oil, so that the oil into the wood. In the same way in the corresponding table on the table also hot candle oil, so you can reduce the wear and tear of the drawer.


2, burning fire damage

Fire wood can be the first to remove the blade with a knife, and then clean the ball wipe, and then filled with bakelite furniture filling, smooth oil mill, and then polished furniture wax.


3. Peeling paint

Small piece of paint on the furniture surface after the stripping of the same color advertising paint can be applied, and then varnish painted on the surface, it will be intact.


4. Metal furniture rust

Available gauze dipped in a small amount of sewing machine oil will rust wipe, exposed rust and then No. 1 fine water scrub paper to erase rust, with gauze to clean the rust oily net, and then with a 2: 3 ratio of paint and turpentine deployment, uniform Painted in the rust Department.


5. Plating furniture rust

Small pieces can be placed in oil-immersed basin immersion rust, large pieces of available brush or cotton yarn dipped in oil applied to the rust Department, a moment later wipe back and you can remove the rust.


6. Luster dim

Furniture finish luster recovery in two ways: First, with half a cup of water plus 1/4 cup vinegar, wipe with a soft cloth dipped; the second is to use alcohol or toilet water, tea soaked soft cloth swipe once or twice, and then Rub floor wax.

7. Cracks, holes

Table, chairs, cabinet cracks, hole repair methods are two kinds: First, the old newspaper cut into detritus, add the right amount of alum and boiled into a paste, embedded in the seam, dry is strong; the second is to use 1: 1 white glue mixed with wood flour evenly, embedded in cracks, a day and night with sandpaper polished, simple and economical.


8. Hinge loose

Can take a fine chopsticks, such as wood, shaved painted white glue plugs in the wood screw hole hammer into the hammer after breaking the wood, and then re-screw the wood screws, you can tighten.


9. Paint stains

Paint dripping on the furniture, not dry when available with wax water cloth to wipe off, or gently wipe with a steel ball dipped in wax oil. If the paint has been dried out, you can put flaxseed oil on the paint to make it degenerate, and then use a cloth to wipe off, and then polish Serve.




  • Five common quality problems of wood furniture